CLB Labware

Product Details:

Nickel-plated brass tube with a free moving air regulator and serrated gas inlet nickel-plated brass tube, 9mm O.D. Heavy base made of die cast zinc alloy with a V-cut. Base dia 80mm and overall height 140mm approx. Powder coated or stove enamel finish.

Product Details:

Details:

• CLB-102A -Natural Gas, 11mm dia tube
• CLB-102B - L.P.GAS, 11mm dia tube
• CLB-102C - Natural Gas, 13mm dia tube
• CLB-102D - L.P.GAS, 13mm dia tube
• CLB-102E - Coal Gas, 13mm dia tube

Product Details:

Produces a very hot flame which can be used for glasswork. Nickel-plated brass tube, 13mm dia and 105mm length, with threaded disc wall for adjustment of the air/gas mixing. 9mm O.D. serrated gas inlet tube. Conical mixing section. Base dia 80mm and overall height 120mm. For propane gas.

Product Details:

Cast iron stove enameled finish frame to clamp various items together or securing them to a tabletop. Nickel-plated screw and cross pin.

Product Details:

Made of flint glass, it has a capacity of about 125ml and. 11 is round in shape. Includes a woven wick in metal holder and a glass cap.

Product Details:

This cast iron round tripod stand comes with detachable legs for easy storage. Stove enamel finish.

Details:

Product Details:

Base made of 3mm thick steel sheet, powder coated or baked enamel finish. Base drilled and tapped at the edge (except for 300 x 150mm, which has two holes). Supplied with nickel-plated steel rod. Base pack of 2 pcs and rod pack of 5 pcs. 

Other Details:

Product Details:

Heavy cast iron base having baked enamel finish with hole at the edge (300 x 150mm size has two holes). Base pack of 2 pcs, rod pack of 5 pcs supplied with nickel plated steel rod, one end half round and the other machine threaded with washer and nut for fixing it to the base.

Details:

Product Details:

Details:

• CLB-149B- 200 x 128mm (8 x 5 )
• CLB-149C- 225 x 125mm (9 x 6 )
• CLB-149D- 300 x 150mm (12 x 6           

Product Details:

Other Details:

Product Details:

Strong enough for holding objects from 90-100mm. Die-cast zinc alloy, cork lined jaws with plated brass tommy screw and 140mm long anodized aluminum rod of 8mm dia.

Product Details:

This cast aluminum alloy clamp with three rubber-covered jaws opens 90mm. With plated brass tommy screws for opening the jaws and 140mm long anodized aluminum rod of 8mm dia.

Product Details:

V-shaped jaws, die-cast zinc alloy. Both tommy screws at 180º angle to hold support rod and extension clamps at 90º angle. For rods upto 19mm dia.

Product Details:

Right-angle clamp holder, zinc alloy with perpendicular jaws, one is V-shaped with thumbscrew at right angle and the other rounded with thumbscrew offset 45º, can hold two rods upto 19mm at right angles

Product Details:

Right-angle clamp made from extruded aluminum alloy, can attach clamps at right angles from horizontal or vertical rods, can hold rods upto 19mm (3/4”) dia and clamp handles upto 13mm (1/2”) dia.

Product Details:

Stamped steel body, plated to avoid rust and plastic coated jaws which open from 10 to 35mm (3/8 to 1-3/8”) and fits rods upto 14mm dia.

Product Details:

Holds firmly any buret upto 100ml size. Each buret is held independently. Fits support rods upto 13mm dia. Die-cast alloy body, with rubber coated jaws.

Product Details:

Made from strong plated steel sheet with jaws covered with plastic and rubber tubing. Fits rods upto 19mm (¾”) dia.

Product Details:

To accommodate thermometers 6 to 12mm (1/4 to 1/2) in dia. Can be attached to a support rod upto 16mm (5/8) in dia. Bronze clamping jaws rotate 360degree and are easily tightened into position with the help of a wing nut.

Product Details:

Nickel-plated brass, strong quality. Width between bars 25mm with hinged bottom bar for direct fitting and removal without access to ends of tubes.

Product Details:

Made from thick brass sheet and mounted on a polished wooden handle, it maintains its spring strength. For use with 12 to 40mm dia test tubes.

Product Details:

Product Details:

This low form burner is tip resistant and fire resistant. Comes with a wick holder and an aluminum cap, to extinguish the flame and prevent evaporation. A replacement wick included.

Product Details:

Product Details:

Die-cast zinc alloy. V-shaped jaws with plated brass tommy screws to hold objects at right angle.

Product Details:

Product Details:

Cast-iron body with plated brass tommy screws. Baked wrinkle black paint. Holds upto 19mm rods.

Product Details:

Product Details:

Product Details:

Made from one piece, nickel plated steel wire, this clip is self aligning and has finger grips.

Product Details:

Made from one-piece heavy gauze plated steel wire. With finger grips.

Product Details:

Made of plated-steel having a heavy wire gauze top. The wire gauze measures 7 x 8cm and the stand has an overall height of 11cm.

Product Details:

Cast-iron Body. Baked enamel finish, to fit rods upto 13mm dia. The distance from center of the ring to the center of the clamp is 10.7cm (4 ¼ “).

Details:

CLB-161B       75mm (3”)      

CLB-161C       100mm (4”)

CLB-161D       125mm (5”)                            

CLB-161E       150mm (6”)

Product Details:

Rings made from 6mm plated steel rod. Attached to aluminum clamp, with plated brass tommy screw.

Details:           

• CLB-162B- 75mm  (3”)     
• CLB-162C- 100mm (4”)
• CLB-162D- 125mm (5”)
• CLB-162E- 150mm (6”)

Product Details:

Ideal for attaching various apparatus, pulleys, cords, balances and pendulums to support rods.

Product Details:

Used to hold a thermometer and other heat specimens at a distance of 4 ½” from the support rod. The aluminum hook can be adjusted at any angle by tightening the wing nut. For use with support rods up to 13mm (1/2”) dia.

Product Details:

Laboratory Wooden Test Tube Holder/Clamp is used for holding tubes from 10 to 20mm dia. with steel spring.

Product Details:

Suitable for moving hot objects like crucibles. Tips are serrated for easy gripping of objects. Overall length 200mm approx.

Product Details:

Product Details:

With four removable concentric rings, this cast iron tripod is ideal for use with any size laboratory apparatus. Circular shaped, stove finish with detachable legs for easy storage.